Pre Fabricated Homes In Turkey

TH4S · #1 23-12-2006, 11:36 AM

Pre Fabricated Homes In Turkey, Prices start from as little as.£25.000.

Details and spefications.direct from the manufacture,

Quote:

Pre-manufactured light prefabricated constructions are mounted on the precast concrete basement. The most important advantage of steel construction system is being light and resistant to seismic movements.
Light prefabricated constructions are preferred increasingly due to its short production time and mounting facility and allowance for an easy dismantling and erection for several times .
Prefabricated buildings can be manufactured in any size and design. They can be one , two or three storey.The transportation of the products can be done by using trucks,trailers,vessels,loading containers ,trains and cargo airplanes.Crane is not required for loading and downloading in Fiber Cement board covered panel system buildings.Crane shall be required for bolted type buildings with Fiber Cement and panel system buildings with steel sheets. The packaging is in comformance to the international transportation and packing codes.
Prefabricated buildings can be delivered with or without electrical and sanitary installation, painting and glazing. All materials are certified by T.S.E and by I.S.O 9001.Raw materials are in T.S.E and D.I.N norms.
Fiber Cement boards (Hekim Board brandmarked) , used for outer and inner surface claddings,ceiling and mezzanine coverings in prefabricated building and container production facility,are comprised of cement,silicate,and cellulosed fiber and produced in high pressure and temperature with kiln drying manner.By using this method the deformation of the board can be prevented from thermal variations and different climate conditions.

TECHNICAL SPECIFICATIONS OF PREFABRICATED BUILDINGS PLAIN:
Pre-manufactured light prefabricated buildings can be applied to any accomodation plan in fold of 125 cm in width and length according to the utilization purpose. All prefabricated constructions are made up from the modulation of 4 different panels and comprise blind wall panel, wall panel with window, transom wall panel, wall panel with door.
FOUNDATION:
Concreting shall be in accordance with the plan (foundation dimensions) which is supplied by our company,
TECHNICAL DATAS:
Snow Load : 80 kg/m2
Wind Speed : 102 km/h
Seismic Zone : 1 st degree zone
Climate Zone : 3 rd climate zone

WALL PANELS:
PRESS SYSTEM:
Panel Height : 2500 mm
Panel Thickness : 60 mm (100 mm optional)
Walls : 8 mm, Fire-proof FIBER CEMENT boards (HEKIMBOARD brandmarked,DIN 4102-2, A2 Class)
Insulation : 44 mm expanded polystyrene foam (10-12 kg/m2)
Heat Conduction Coefficient : k:0.64 Kcal/m2hC
CARCASSED SYSTEM
Panel Height : 2500 mm
Panel Thickness : 60 mm (100 mm optional)
Panel Carcas: : 30x43x1.5 mm DKP U profile
Walls : 8 mm, Fire-proof FIBER CEMENT boards(HEKIMBOARD brandmarked,DIN 4102-2, A2 Class)
Insulation : 44 mm expanded polystyrene foam (10-12 kg/m2)
Heat Conduction Coefficient : k:0.64 kcal/m2hC
CEILING COVERING:
Covering : 6 mm, Fire-proof FIBER CEMENT boards (HEKIMBOARD brandmarked,DIN 4102-2, A2 Class) mounted with H profiles as ceiling coverings. PVC H profiles with metal reinforcement for ceiling connections to prevent rust/oxidation.
ROOF:
Roof Covering : Onduline (bituminous cornegated sheet) for residences, galvanized steel sheet for site constructions and also if required shingles can be applied as roof coverings.
Truss : Steel truss in 125 cm intervals along the building with 20 cm wide eaves and rain gutter
Purlin : 5x5 cm wooden purlin
CARRYING SYSTEM :
Load carrying system is made up from box profile roof trusses and H profile columns(1.5 mm galvanized) which are specially rolled by rollformer machine. Inner floor profiles comprise 1.2 mm galvanized steel sheets. Omega profile for sides, over-panel omega, fascia cladding material, window subframes and Eaves ceiling covering material are made of PVC (to prevent oxidization and condensation). All PVC materials may be in metal form depending on the static specifications of the building.
WALL JOINTS :
Wall joints are made up from H profile columns.PVC cover will be used to prevent oxidization for outer surfaces of the external wall profiles.
DOORS :
External doors have galvanized steel sheet frames with laminated MDF pressed doors. Internal doors and aluminium doors will be supplied for houses and insulated steel sheet doors for site constructions. American panel doors or steel doors can be supplied according to the design content of the houses or request .
WINDOW FRAMING AND GLAZING :
All window frames are INTERPEN trade marked PVC. Aluminium or wooden frames can be supplied optionally.
ELECTRICAL AND SANITARY INSTALLATION :
Antigron cables and PVC conduits are used in the electical installation.Sanitary and electical installations are done over the plaster.
PAINTING :
For metal parts;2 layers of oil-paint over 1 layer rapid primer.2 layers of silicone based outer face paint for external surfaces and 2 layers of plastic based inner face paint for inner surfaces and ceilings,

Please Note,
You would need to buy a piece of land.

Mavi · #2 14-03-2007, 01:03 AM

I have had a look at these before